Today's masonry anchors come in a variety of shapes and sizes. For many people, determining which of these anchors they need to complete the task is a challenge.
Below is a list of some of the more common fasteners used in masonry?
Drop-in anchor
A drop-in anchor is among various types of Masonry Anchors which is inserted into the concrete in most cases. They are employed in high-strength applications by securing bolts to the internal threading of the anchor. They can also be threaded into coils (a thicker thread for a coil threaded rod). A lip on some masonry anchors prevents the anchor from sinking too far into the concrete.
Anchor with Lag Shield
Lag Shield Concrete Anchors are other types of Masonry Anchors which are used with Lag Screws to anchor in the concrete. Lag shields are composed of two sections that expand when the lag screw is inserted, creating a tight wedge in the concrete. Lag shield anchors are similar to drop-in anchors, but they are specifically intended to accept lag screws.
Concrete masonry screw
Masonry concrete screws are among various types of Masonry Anchors which are arguably the most commonly used concrete screw. The bright blue coating on the concrete screws makes them easy to identify. They are used to join wood or metal to various masonry materials. A concrete screed is straightforward to install. Drill a hole through both materials first, then screw the screw into the hole.
Sammy Hanging Anchor
For hanging applications, Sammy's screws are often anchored. These types of Masonry anchors have a threaded aperture that receives the threaded rod and is usually mounted vertically or horizontally. These hanging anchors come in a variety of styles.
Hammer Pin Anchor
Hammer Driven Pin Anchor are other types of Masonry Anchors which are small anchors to secure plywood to concrete. These anchors are pretty easy to use. They have a lip on their head that allows them to work with pores that have gone too far into the material accidentally. Drill a hole through both materials and insert the pin anchor into the hole to install one of these pin anchors. The pin is driven down through the center of the fastener, forcing both sides out into a wedge shape and securing the fastener.
Anchor for Toggle Wings
When a hollow wall is present, toggle wing anchors are used. It is typical when cinder blocks are used to construct the structure's walls. They are also employed extensively in the drywall industry. These anchors are not suitable for lifting heavy weight loads. To use one of these anchors, you must first drill a hole large enough to fit the toggle piece of the anchor.
Anchor with Double Expansion Shield
Double Expansion Anchor Shields are commonly used in brick and block construction. When a screw is inserted into these types of Masonry anchor, it pulls down toward the center, resulting to extend anchor. These anchors can only stretch so far. It is done to prevent the bricks from cracking. To install a double expansion shield anchor, drill a hole large enough to fit the anchor, then screw the anchor into place.
Anchor for Sleeve
Sleeve anchors are typically used in brick or block and are reasonably straightforward. Although they can be used in concrete, they are not as strong as wedge anchors. A sleeve anchor is an excellent solution for light to medium holding applications. Nut drive, commonly used for increased strength and Phillips/Slotted Combo Driven Flat Head, used when a smooth surface is required, are two types. Install the nut-driven type, drill a hole and place the sleeve anchor in it. Then, place the washer and nut over the open threads and tighten the nut.
Conclusion
Masonry anchors are very useful for workers. If you want to know about the different types of Masonry Anchors in brief, you can trust this article.
Comments